They say music soothes the soul, but poor control of your system can kill the harmonics of a beautiful song or road trip. If you want to extend great-sounding music from your source to your amps, then get yourself a Precision Power Digital Bass Reconstruction Processor.
The BP.8 digitally maximizes the ultra-low bass on all types of recorded material. The processor detects bass harmonics, then digitally recreates the original essentials for the incredible punch and impact of live music. You get more bass!
Features
SWEEP
selects the frequency boosted by the equalizer. This is the “center frequency,” which can be as low as 27Hz or 63Hz. Choosing this frequency depends on your taste in music.
WIDTH
increases or decreases the bandwidth range, or “Q,” boosting frequencies near the “center frequency.” Narrow Q focuses on harmonics immediately surrounding the center frequency. Wide Q unlocks harmonics all around the center frequency.
OUTPUT VOLTAGE
is the amount of boost level. Your instincts might be to choose 10V because why not, but hold on a second… more isn’t necessarily better. In this case, more can be dangerous, potentially damaging your subwoofers.
MAX BASS INDICATOR
lights above the equalizer controls are a visual representation of the boost level. Bright, continuous illumination indicates maximum bass enhancement levels have been relinquished. Remember, more isn’t necessarily better…
DASH MOUNT CONTROL
included with this processor can be mounted anywhere in the vehicle, but near the driver seat is recommended.
Specifications
- Output Level: 13.5 Volts
- Frequency response: 10-100KHz
- Total Harmonic Distortion: 0.003%
- Signal-to-Noise Ratio: 130dB
- Balanced input noise rejection: >60dB
- Dimensions: 5-¼"L x 7-½"W x 1-¼"H
